Adaug profilul Obțineți mai multe cotații Identificare

HILLCREST ENGINEERING INSTRUMENTATION LIMITED

Regatul Unit

Factory icon Fabricant/ producator

Contact
Informații

Compania HILLCREST ENGINEERING INSTRUMENTATION LIMITED, este o societate Fabricant/ producator, creată în anul 1980, care își desfășoară activitatea în domeniul Masurarea si reglarea presiunii - aparate si instrumente. Are sediul în Leek, Regatul Unit.

Alte societăți din același domeniu de activitate:

Domain icon Fabricant/ producator

HILLCREST ENGINEERING INSTRUMENTATION LIMITED

Upper Hulme

ST13 8TY Leek - Regatul Unit

Contact

Informații companie

Cifre-cheie

  • Efectiv
    11 – 50

Organizare

  • Anul crearii
    1980
  • Natura intreprinderii
    Sediu social
  • Activitate principala
    Fabricant/ producator

Activități ale HILLCREST ENGINEERING INSTRUMENTATION LIMITED

  • Masurarea si reglarea presiunii - aparate si instrumente
Office Building Outline icon
O pagină pentru compania dumneavoastră
Vedeti acest lucru? Si clientii dvs. potentiali il vad Veniti alaturi de noi pentru a fi vizibil pe europages.
Îmi adaug compania

europages va recomanda de asemenea

O selectie de intreprinderi apropiate de activitatea:

PETER HIRT GMBH

Elvetia

Factory icon Fabricant/ producator

Verified by europages badge

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

PPS (PRESSURE PROFILE SYSTEMS)

Regatul Unit

Factory icon Fabricant/ producator

Verified by europages badge

HÖNTZSCH GMBH

Germania

Factory icon Fabricant/ producator

Verified by europages badge

MELUTEC METROLOGY GMBH

Germania

Office Building Outline icon Prestatar de servicii

Verified by europages badge

Our calibration laboratory is accredited according to DIN EN ISO/IEC 17025 by DAkkS (Deutschen Akkreditierungsstelle GmbH [German Accreditation Body]) for measuring the parameters of length, torque, temperature, relative humidity and scales under register number D-K-15048-01-00. As an accredited DAkkS calibration laboratory, we comply with the requirements of all national and international standards. We don't just want to satisfy our customers; we want to inspire them. Since the company was founded in 1991, we have expanded to offer a variety of services and are currently continuously developing in this sector. We have extensive experience in calibration technology. Customers in Germany and around the world benefit from our knowledge and flexibility. See Melutec Metrology for yourself and you will discover why our expertise, flexibility and innovation put us head and shoulders above the competition.

Cerere de oferte de preț

Creați o singură cerere și obțineți mai multe oferte de preț de la furnizori verificați.

  • Numai furnizori relevanți
  • Respectarea confidențialității datelor
  • 100% gratuit