Rezultate pentru

Electrical power test - Import export

338 Intreprinderile

0 Produse

MERECS ENGINEERING GMBH

Germania

Compania MERECS ENGINEERING GMBH, este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul Automatizare - consiliere. De asemenea, activează în aceeași măsură și în domeniile Tilt angle sensors, inertial sensors, Test benches, Special development of test benches, End-of-line test systems, Durability test benches, Development test benches, Climate test benches, Temperature test benches, și Leakage test benches (gas/hydrogen). Are sediul în Steinfurt, Germania.
PATELEC-ELPENA SP. Z O.O.

Polonia

Patelec Group has been operating on the market for more than 50 years. We deal with copper manufacturing and processing, and our products are delivered to plants designing power tools, submersible pumps, medical instruments, and many more. It’s worth mentioning that all electrical cables, bare wires and strips made by us are subject to strength and ageing tests, and the copper rod processing service is performed according to EN 13602 and EN 60228. Exercising strict control of the entire production process, we also manufacture: – electrical plugs; – flat cables and split flat cables; – PVC cables; – round cables and spiral cables; – electrical wires; – wire rods. Main products in our range are low voltage cables with PVC or rubber insulation for 300/500 V– 450/750 V. We provide cables meeting such standards as SPT, SV, VCTF and SJ. We also produce cable harnesses suitable for supplying of machinery operating in wet environment or fully submerged and on the water surface. Our in-house engineering solutions include Ghelios products manufactured for operation in areas requiring low smoke emission and toxicity in the event of a fire, as well as Thorex products used in hazardous (ATEX) zones. Additionally we recommend a patented Hercules design for high load transfer applications, characterised by water and oil resistance.

Site-ul Web
AGEA-KULL AG

Elvetia

agea-kull AG was established in 1996 through the merger of the two companies agea AG und Hans Kull AG. Today, the company specialises in the production of high-voltage and high-current testing systems for power engineering. The products serve as a form of quality assurance for components for electricity production and distribution and cover a wide range of cases in which high-voltage tests are essential, such as production and acceptance tests, commissioning and repair inspections, on-site status inspections and diagnosis. Among these, mobile testing facilities for on-site inspection are the focus of our portfolio of services. We also provide development, construction and manufacturing of high-voltage and high-current systems and components as well as repair und maintenance activities for these.

Site-ul Web
POPPE + POTTHOFF MASCHINENBAU GMBH

Germania

Poppe + Potthoff Maschinenbau GmbH develops and manufactures installations for operation and endurance testing of components in the automotive and shipbuilding sector as well as other industries. The precise and powerful special machines that this specialist for high pressure and testing technology produces, are used in research, development and production processes. This includes installations for bursting pressure and leak tests, pressure cycling testing, autofrettage as well as installations for testing the function of components. Our company, based in Nordhausen (Germany), is a member of the Poppe + Potthoff Group. As a developer of systems, we put our customers' requirements centre stage. Our focus is on technologically complex installation systems of testing and high pressure engineering. As a developer of systems, we offer everything from a single source; from concept development through to design and production (mechanical + electric) all the way to software development.

Site-ul Web
FOCQUET

Belgia

Ever since it was founded in 1892, the company Focquet has offered a very broad range of services focusing on industrial electric motors and transformers (sale-reconditioning-rental), power electronics and industrial pumps (sale-support). Our large inventory means that we can quickly meet any requirements for used or new equipment (2EC) and our workshops can fully customise motors to meet our customers' precise needs. In 2005 we set up a pump and pump repair section, and in March 2011 we added a power electronics department to meet the rising demand for variable speed equipment. Our core strengths: competitive prices – quality products – inventory of over 20, 000 IE2, IE3 and IE4 cage motors – slip-ring motors – medium- and low-voltage – direct current, transformers and pump spares. Your needs: our challenge!

Site-ul Web

O pagină pentru compania dumneavoastră

Vedeti acest lucru? Si clientii dvs. potentiali il vad Veniti alaturi de noi pentru a fi vizibil pe europages.

Îmi adaug compania

W-FILTER GMBH

Germania

W-FILTER has been impressing customers with its quality and filtration solutions since 1980. This second-generation family business successfully demonstrates continuity in the market of industrial filters for plant construction. In all these trades, the focus was placed on low flow resistance and the resultant low energy consumption with infrequent cleaning of the system, which also saves time. Experience for yourself the expertise of W-FILTER in the area of dirt traps for your upcoming projects in order to increase plant and energy efficiency – we would be happy to advise you.

Site-ul Web
ATLAS MATERIAL TESTING TECHNOLOGY GMBH

Germania

For more than 100 years, Atlas has been the pioneer in continually developing new solutions in order to assist companies in testing the durability of their products. From our first instrument in 1915 (the Solar Determinator), which simulated the fading effect the sun has on fabric, through to today's comprehensive network of weathering – a range of services and products for materials testing – our focus has remained the same. We offer our customers sophisticated technologies and advanced testing solutions so that they can determine the durability of their products. As a result, our customers can reach their ultimate goals: Quality products, competitive advantages and faster times to market. We help our customers to develop testing programmes with which they can obtain the data they need to make the right decisions relating to the material performance of their products.

Site-ul Web
MP GMBH MONTAGE- UND PRÜFSYSTEME

Germania

MP GmbH Montage- und Prüfsysteme was established in 1990 and develops and produces bespoke machines for assembly, measuring and testing processes, tailored to customer requirements. For the assembly machines, we use our modular system with custom process design. Our MP joining press, process controller (traceability) and dosing quantity tester are hugely popular among are customers and are put to use in many applications. Our clients, who include AAM, Biotronik, BMW, Bosch, Continental, Daimler, Häfele, Linamar, Magna, Nidec, Oerlikon, Stihl, Volkswagen, ZF and many more, operate in the fields of automotive manufacture, medicine, furniture and garden tools. We support our clients through our extensive expertise in the assembly and testing of gearboxes, exhaust gas recirculation coolers, camshaft modules, viscous dampers, automotive pumps, artificial pacemakers, colostomy bags, dowels, hedge trimmers, etc. and have previously supplied to clients in Brazil, China, Mexico, Thailand and the USA.

Site-ul Web
PETER HIRT GMBH

Elvetia

Peter Hirt linear ball bearings adapted to be play-free. The components of linear ball bearings, including shaft, ball cage and housing, are individually lapped and honed together in matched sets for each individual linear ball bearing. This ensures no stick-slip effect and maximum lifetime values. Peter Hirt thread gauge feelers are available from the smallest size of 0-200 (ball diameter 0.200 mm) up to size 12 (ball diameter 4.000 mm). The smallest thread gauge feeler at present, size 0-200 with a ruby ball diameter of 0.200 mm, is sized for measuring threads up to size M1.7. The thread gauge feelers are available individually or in a protective wooden box as a 12 pc, 13 pc or 14 pc set. Signal conditioning modules from Peter Hirt are specially calibrated for T-series tranducers with TESA® compatible half-bridge circuit. Modules are available with supply voltages of 5, 12 or 24 VDC and with a bipolar or unipolar output signal of ± 5 VDC, ± 10 VDC, 0-5 VDC, 0-10 VDC

Site-ul Web
BTF

Belgia

BTF SA specialises in the bespoke construction of different types of industrial furnaces designed for all industrial sectors, and ceramic furnaces, working in temperatures of up to 1800°C.They can be designed to operate in air, neutral gases or under vacuum, or to perform specific heat treatments such as temepering, cementation, annealing, fusion, drying, ageing, preheating, and so on. BTF also custom designs and builds furnaces used to test various mateirals' fire safety. We engage in extensive R&D efforts with other companies and accredited laboratories. These furnaces, running our proprietary management and data acquisition software, enable tests to be made to meet a wide range of standards (EN-1363-1; -1363 in -2 ASTM-E119; UL-263; BS-476-20; HCM; RWS). We provide maintenance, repair and restoration services for all brands of furnaces, supplying spare parts such as thermocouples, regulators, insulating and/or refractory materials, wound and armoured heating elements.

Toate produsele pentru "electrical power test"

Cuptoare pentru testarea rezistenței la foc

Site-ul Web Vedeți toate produsele

WEISS UMWELTTECHNIK GMBH

Germania

Compania WEISS UMWELTTECHNIK GMBH, este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul Sisteme pentru incinte albe si procedee. De asemenea, activează în aceeași măsură și în domeniile Cuptoare industriale, Automotive test benches and brake test benches, steam sterilisers, Cuptoare industriale, Air-conditioning systems for IT systems, Climatic chambers, Climatic testing in climatic chambers, Climatic chambers, și corrosion tests. Are sediul în Reiskirchen, Germania.
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG

Germania

Compania MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG, este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul Vehicule - sisteme de navigatie inteligente. De asemenea, activează în aceeași măsură și în domeniile Control si reglare - aparate si instrumente, Informatica - software, Semnalizare - sisteme si instalatii, Radare si radionavigatie, Electricitate - echipamente de distributie, Electricitate - componente si piese, Electricitate - aparate, Birouri echipate si fabrici - servicii, și Inginerie - asamblori industriali. Are sediul în Troisdorf, Germania.

SVS NEVELIN GMBH

Germania

Compania SVS NEVELIN GMBH, este o societate Distributie, care își desfășoară activitatea în domeniul Motoare electrice si piese. De asemenea, activează în aceeași măsură și în domeniile Meidensha, EMC filter, Power chokes, Servo inverters, Fuji Electric, Drive technology, Asynchronous motors, Automation technology, și Three-phase motors. Are sediul în Essen, Germania.
ANLAGENTECHNIKTORA GMBH

Germania
ELECTRICAL TEST MIDLANDS LTD

Regatul Unit

Compania ELECTRICAL TEST MIDLANDS LTD, care își desfășoară activitatea în domeniul Cabluri electrice. De asemenea, activează în aceeași măsură și în domeniile Lustre, Bobine electrice, Lustre, și Bobine electrice. Are sediul în Walsall, Regatul Unit.
ELECTRICAL TEST MIDLANDS LTD

Regatul Unit

Compania ELECTRICAL TEST MIDLANDS LTD, este o societate Prestatar de servicii, care își desfășoară activitatea în domeniul INSTALATII ELECTRICE. Are sediul în Cannock, Regatul Unit.
POWER ELECTRICAL

Regatul Unit
POWER ELECTRICAL

Regatul Unit
CHINA, WUHAN GUODIAN HUARUI POWER TEST TECHNOLOGY CO.,LTD

China

Compania CHINA, WUHAN GUODIAN HUARUI POWER TEST TECHNOLOGY CO.,LTD, este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul INSTALATII ELECTRICE. Are sediul în Wuhan, China.
POWER ELECTRICAL (DERBY) LTD

Regatul Unit

1 POWER ELECTRICAL

Regatul Unit

Compania 1 POWER ELECTRICAL, care își desfășoară activitatea în domeniul Cabluri electrice. De asemenea, activează în aceeași măsură și în domeniile Lustre, Bobine electrice, Lustre, și Bobine electrice. Are sediul în Bedford, Regatul Unit.
POWER HOUSE ELECTRICAL

Regatul Unit

Compania POWER HOUSE ELECTRICAL, care își desfășoară activitatea în domeniul Cabluri electrice. De asemenea, activează în aceeași măsură și în domeniile Lustre, Bobine electrice, Lustre, și Bobine electrice. Are sediul în Boston, Regatul Unit.
CRANAGE EMC & SAFETY

Regatul Unit

Compania CRANAGE EMC & SAFETY, este o societate Prestatar de servicii, care își desfășoară activitatea în domeniul Testarea produselor si a materialelor. De asemenea, activează în aceeași măsură și în domeniile accredited laboratories, și electrical appliance testing. Are sediul în Market Drayton, Regatul Unit.
POWER ELECTRICAL INSTALLATIONS

Regatul Unit
TERMOELEKTRO D.O.O.

Serbia

Compania TERMOELEKTRO D.O.O., este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul Centrale hidro-electrice. De asemenea, activează în aceeași măsură și în domeniile construction of electric power plants. Are sediul în Beograd, Serbia.
CABLE POWER ELECTRICAL SERVICES

Regatul Unit
SOVTEST ATE, LLC

Rusia

Compania SOVTEST ATE, LLC, este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul Componente electrice si electronice - utilaje pentru productie. De asemenea, activează în aceeași măsură și în domeniile industrial engineering, microelectronics, test instruments for the electrical and electronics industry, și inspection and tests on electric and electronic equipment. Are sediul în Kursk, Rusia.
GEYLANI ELEKTRIK SAN VE TIC LTD STI

Turcia

Compania GEYLANI ELEKTRIK SAN VE TIC LTD STI, este o societate Vanzator en-gros, care își desfășoară activitatea în domeniul materiale electrice. De asemenea, activează în aceeași măsură și în domeniile electrical power supply cable. Are sediul în Gaziantep, Turcia.
MICROSUPPLYEU

Islanda

Compania MICROSUPPLYEU, este o societate Vanzator en-gros, care își desfășoară activitatea în domeniul Electricitate - import-export. De asemenea, activează în aceeași măsură și în domeniile electrical power supply cable, accessories and spare parts, și accessories and equipment for ships and sailboats. Are sediul în Husavik, Islanda.
UBB CABLE

Turcia

Compania UBB CABLE, este o societate Fabricant/ producator, care își desfășoară activitatea în domeniul Cabluri electrice. De asemenea, activează în aceeași măsură și în domeniile electrical power supply cable, cable accessories and cable glands, și manufacture of electric cables. Are sediul în Diyarbakır, Turcia.

Cerere de oferte de preț

Creați o singură cerere și obțineți mai multe oferte de preț de la furnizori verificați.

Numai furnizori relevanți
Respectarea confidențialității datelor
100% gratuit

Găsiți devize pentru

Filtre

Rezultate pentru

Electrical power test - Import export

Număr de rezultate

338 Intreprinderile